Download Brochure
Inquiry Now

Water Foam Nozzle

Gunmetal/SS/Aluminium

Water Foam nozzles are used for projecting secondary aspirated (non-aspirated) foam over long distances. Being more dense (expansion ratio 1:3 to 1:4), the non-aspirated foam travels further as compared to normal foam, and is useful for tackling large flammable liquid fires, including storage tank fires. It can also be used as water nozzle for cooling/extinguishing.

Brief Description: USAFE Water Foam Nozzle made of Gunmetal, suitable for 63 mm waterway size monitor. Nozzle shall have nominal foam & available in different flow capacity and water jets and narrow/wide angle spray. It shall have swivel inlet matching to monitor threads, jet/ spray changeover arrangement, and rubber bumper.

1.0 GENERAL DATA
1.1 Inlet Threaded 2.5”/3”/4”/6” BSP (Female) Swivel Inlet
1.2 Outlet Hollow Jet/Spray Nozzle
1.3 Foam Compound Inlet Threaded 1”/1.5” BSP (Male)
1.4 Material of Construction Gunmetal
2.0 MATERIAL OF CONSTRUCTION
2.1 Nozzle body Gunmetal, IS:318 LTB-2
2.2 Pattern Changeover Handles SS304 IS: 3444 Gr. I (Rubber coated)
2.3 Bumper Rubber (Natural)
2.4 Washer, O Rings Rubber (Natural)
2.5 Pick-up Tube PVC Non-collapsible Hose with SS304 Dip Tube
3.0 OPERATIONAL/ TECHNICAL DATA
3.1 Working pressure 5 to 12 Kgf/cm2
3.2 Discharge Pattern Hollow Jet to Narrow Fog to Wide Fog
4.0 FINISH
4.1 Nozzle Natural finish/Polished
4.2 Pattern Changeover Handles Rubber Coated (Natural)
5.0 WARRANTY
5.1 Warranty & Guarantee 12 Months from the date of supply