Safety is of the highest priority to chemical factories, and various precautions are taken to lessen the risks associated with handling hazardous materials.
One such safety measure is to use Purple K powder, an effective fire suppressant. In this post, we’ll look at Purple K powder‘s significance as a key element of chemical plant safety.
What Is Purple K Powder?
Potassium bicarbonate, sometimes referred to as purple k powder or PKP is a chemical with additives that is based on potassium bicarbonate.
It is produced using a unique chemical formulation. To set this chemical apart from other dry chemical agents, it is colored purple.
What Part Does It Play in Chemical Safety?
The best dry chemical to put out class B and some class C fires is purple K powder.
Because of the bigger size of the potassium ion, it is five times more effective than carbon dioxide and twice as effective as powdered sodium bicarbonate.
It functions by obstructing the chemical chain reaction that forms one of the four sides of the fire tetrahedron, that is, heat, oxygen, fuel, and chemicals in the combustion zone of flammable liquid fires.
By attaching themselves to the surface of the powder particles introduced into the combustion zone, the “free radicals” produced by this chemical reaction prevent the chemical reaction that causes the flames.
How Do You Use Purple K Powder?
After getting this substance from a producer of potassium bicarbonate, it’s critical to confirm everyone’s safety before using it.
Check the Surroundings:
Before using this chemical, make sure the area is clear.
Cut off the source of heat
Eliminate the heat source to prevent the fire from spreading and from igniting more sparks.
Evaluate the kind of fire
It will help you select the appropriate fire extinguisher if you are aware of the class or type of fire that you are dealing with.
Use Global Protection Gear
Even for small fires, it’s important to wear safety gear when using purple K, such as rubber or plastic gloves, a hard hat, and eye protection.
Apply Recommended Extinguisher
Verify that the extinguisher is a B/C model that has purple K powder in it.
Raise The Pin
Remove the safety pin that is attached to the extinguisher.
Target the Base
Make sure the nozzle is 8 feet away from the source and aim it at the base of the flame.
Apply pressure to the handle
Squeeze the handle firmly but gently, then make even, short strokes side by side until all of the burning material is covered.
Sweeping Action
When releasing the powder, move in a sweeping, side to side motion. By doing this, you can be certain that you have put out the fire and eliminated any last embers. Make sure you cover everything completely.
Keep an eye on and observe
Make sure to monitor the area closely after applying the Purple K powder to prevent the fire from starting again. Be ready to use more extinguishing agents or equipment if needed.
If Required, Get Away
Evacuate the area right away and call the fire department for expert assistance if the fire is out of control or is growing.
Observe the Fire Department’s Guidelines
As soon as the firefighters show up, assist them as needed and do as they say.
Tell them about the kind of extinguishing agent that was used in Purple K Extinguishers in this instance.
What Are the Benefits of Using Purple K Dry Chemical Powder?
The effectiveness of purple K powder is among its most important advantages. It is among the strongest dry chemical extinguishers on the market and is capable of extinguishing fires fast and effectively.
It can also be used on electrical equipment because it is non conductive. Moreover, because it is non corrosive, it won’t corrode the equipment or surfaces to which it is applied.
Purple K is more effective to other extinguishing agents in a number of ways.
Compared to other agents, it has a longer shelf life, so it can be used in settings where extinguishers might not be frequently checked.
Using purple k powder to put out fires caused by flammable liquids or gases is an easy, quick, and efficient method. Only professionals with the necessary training should use it close to the fire.
For optimal results, make sure you follow the correct procedures: examine the area, pull the pin, aim at the base with an arm’s length distance, squeeze the handle, and apply side to side.
Purple K does, however, have benefits and drawbacks, just like any other fire suppressant, which should be taken into account when making decisions.
Controlling and managing fire outbreaks requires careful procedures and prompt action.
Conclusion
United Fire and Safety Services is a leading manufacturer that produces high quality Abc Dry Powder and Bc Dry Powder under the USAFE brand for a variety of fire suppression needs, if you’re seeking fire safety solutions.
Please get in touch with us if you need help with Purple K fire extinguishers or any other kind of fire extinguisher, or if you would like to set up a FREE SURVEY & QUOTE for your residence.
We can also service your fire extinguishers and look at and maintain any new or old fire fighting equipment you may have.